|
Quantum
Quantum Tape Automation
 Sunstar
Company. Inc. is proud to be a Quantum partner!
Scalar® i40/i80
Bringing intelligent iLayer benefits to small
and medium-sized businesses. Expands to up to 40 slots (i40) or 80 slots (i80)
of capacity-on-demand.
Key Features and Benefits
-
Simple capacity-on-demand scalability
-
Simplified management with iLayer features
-
Highest level encryption standard
-
AES-256 bit Encryption Standard for highest
level of security
Do you need to upgrade your existing library? Overview
Now entry-level and midrange storage
environments can benefit from Quantum’s intelligent tape libraries. With Scalar
i40 and i80 tape libraries, small and medium-sized businesses spend less time
and money on backup, simplifying everything from initial installation and setup
to ongoing management, and even adding capacity as storage needs grow. The
integrated iLayer software allows you to benefit from reduced management time
and a 50 percent reduction in service calls. And with more than 30,000 iLayer
installations around the world, you can feel confident choosing Quantum Scalar
tape libraries.
| |
Drive Type |
Native Capacity (TB) |
Drives |
Maximum Cartridge Slots |
| i40 - Base Configuration |
LTO-4 |
20 |
1 to 2 |
25 |
| i40- with COD License |
LTO-4 |
32 |
1 to 2 |
40 |
| i80 - Base Configuration |
LTO-4 |
40 |
1 to 5 |
50 |
| i80- with COD License |
LTO-4 |
64 |
1 to 5 |
80 |
Capacity
| |
Scalar i40 |
Scalar i80 |
| Form Factor |
3U |
6U |
| Maximum number of tape drives |
1 full-height or
2 half-height |
3 full-height or
5 half-height |
| Number of magazines |
2 magazines
(20 slots each) |
4 magazines
(20 slots each) |
| Number of cartridge slots |
Base unit: 25
Fully licensed: 40 |
Base unit: 50
Fully licensed: 80 |
| Maximum native capacity |
25 slots: 20 TB
40 slots: 32 TB |
50 slots: 40 TB
80 slots: 64 TB |
| Number of I/E station slots |
0 or 5 |
0, 5, or 10 |
Environmental
| |
Operating |
Non-Operating |
Shipping and
Storage |
| Altitude |
–500 to 10,000 ft
(–152 to 3,048 m) |
–500 to 10,000 ft
(–152 to 3,048 m) |
–500 to 10,000 ft
(–152 to 3,048 m) |
| Temperature |
50º to 95º F
(10º to 35º C) |
50º to 113º F
(10º to 45º C) |
–40º to 140º F
(–40º to 60º C) |
| Relative Humidity |
20 to 80%,
non-condensing |
10 to 90%,
non-condensing |
0 to 95%,
non-condensing |
Power
| |
Scalar i40 |
Scalar i80 |
| Line voltage |
100 – 240 VAC |
100 – 240 VAC* |
| Line frequency |
50 – 60 Hz |
50 – 60 Hz* |
| Rated AC Input Current |
100 Volt – 2.8
Amps
240 Volt – 1.4 Amps |
100 Volt – 5.0
Amps
240 Volt – 2.5 Amps |
| Typical Power Consumption |
100 watts |
200 watts |
| * A
Scalar i80 library with dual power supplies will have these requirement on
both AC inputs to the library but will load share the current draw equally
between each supply and from each AC connection. |
Physical
| Basic Library |
Scalar i40 |
Scalar i80 |
| Height |
5.2 in. (132 mm) |
10.4 in. (264 mm) |
| Width |
17.5 in. (445 mm) |
17.5 (445 mm) |
| Depth (from library front
bezel to back of library; excludes drive sleds)* |
31.2 in. (793 mm) |
31.2 in. (793 mm) |
|
Weight (one power supply, no tape drives, and no tape cartridges installed) |
34.9 lbs.
(15.8kg) |
52.4 lbs. (23.8
kg) |
| |
| Desktop Kit |
Scalar i40 |
Scalar i80 |
| Height |
5.3 in. (135.6
mm) |
10.6 in. (268.8
mm) |
| Width |
18.9 in. (480 mm) |
18.9 in. (480 mm) |
| Depth (from library front
bezel to back of library; excludes drive sleds)* |
31.2 in. (793 mm) |
31.2 in. (793 mm) |
| *
Depths listed above exclude drive sleds. Drive sleds will add up to 50 mm to
the overall length of the library depending on tape drive type (half-height,
full-height, Fibre Channel, SAS). Additionally, when planning space
requirements, take into account installed cables (particularly fibre-optic
cable radius on Fibre Channel tape drives). |
Supported Tape Drives
| Vendor |
Type |
Interface |
| HP |
LTO-4 |
Fibre Channel (4 Gb, LC connector)
SAS (3 Gb, SFF-8088 connector) |
|
