| Audit time: |
<2 min
|
| Number of
cartridge slots: |
326 or 494 (with
expansion door)
1-6 LSMs
|
| Number of tape
drives / types: |
1-10 T9840,
T9940, DLT 7000 and/or DLT 4000 or 1-4 or 2-4 TimberLine 9490
|
| Mean exchanges /
swaps between failure (MEBF/MSBF): |
1,000,000
|
| Mean time between
failures (MTBF): |
70,000 hr (full
operation)
|
| Mean time to
repair (MTTR): |
<30 min
|
| Supported host
platforms: |
All major
operating systems
|
| Robotics control
interfaces: |
SCCI-2 or serial
|
| Digital vision
system: |
Unique digital
vision camera system performs continuous calibration and reads bar codes
|
| Operator panel: |
User-friendly
configuration and diagnostic controls, status display and large viewing
window (optional)
|
| Automatic clean: |
Dedicated
cleaning cartridge slot for tape drive cleaning by library or software
command
|
| Continuous
automation calibration: |
No periodic
maintenance or alignment required
|
| Height: |
72 in (183 cm)
|
| Depth: |
With no drives -
30.3 in (77.0 cm); 40.3 in (87.7 cm) with expansion door TimberLine drives -
54.0 in (137.0 cm); 64.0 in (163.0 cm) with expansion door T9840/T9940/DLT/RedWood
drive - 59.0 in (150.0 cm); 69.0 in (175.0 cm) with expansion door
|
| Width: |
46 in (117 cm)
|
| Weight: |
640.0 lb (290.0
kg); 719.0 lb (326.0 kg) with expansion door
|
| Temperature
(operating): |
+59° to +90° F
(+15° to +32° C)
|
| Temperature
(non-operating): |
+50° to +104° F
(+10° to +40° C )
|
| Relative humidity
(operating): |
20%-80%
|
| Relative humidity
(non-operating): |
10%-95%
|
| Voltage: |
90-264 VAC @
47-63 Hz single phase (auto-ranging)
|
| Library
(operating maximum continuous - not peak): |
1.67 A @ 120 V,
0.83 A @ 240 V, 683 BTU/hr
|
| Drives: |
Drive power
consumption varies. Refer to individual drive specifications
|
| Safety: |
CSA standard
CAN/CSA-C22.2, no. 950-95
UL listed to UL 1950, 3rd Edition
GS licensed to EN 60950, 2nd Edition, 1991 + A1, A2, A3, A4
|
| Emissions: |
FCC #47, part 15,
subpart B, class A
VCCI class A European Union CE emmissions standards
AS/NZS 3548; 1995 (Australia, N.Z.)
ICES-003 (Canada)
|
| Immunity: |
European Union CE
immunity standards |