| Throughput per
hour, native (uncompressed): |
(maximum
configuration 8 drives)
LTO Gen 1 (15 MB/sec) - 432.0 GB/hr
LTO Gen 2 (30 MB/sec) - 864.0 GB/hr
LTO Gen 3 (80 MB/sec) - 2304.0 GB/hr
SLDT 320 (16 MB/sec) - 460.8 GB/hr
SLDT 600 (36 MB/sec) - 1036.8 GB/hr
|
| Audit time: |
3 min
|
| Average cell to
drive time: |
7.6 sec
|
| Capacity, native
(uncompressed): |
(maximum
configuration 80 cartridges)
LTO Gen 1 (100 GB/cart) - 8.0 TB
LTO Gen 2 (200 GB/cart) - 16.0 TB
LTO Gen 3 (400 GB/cart) - 32.0 TB
SDLT 320 (160 GB/cart) - 12.8 TB
SDLT 600 (300 GB/cart) - 24.0 TB
|
| Number of
cartridge slots: |
40, 60, 80
|
| Number of tape
drives / types: |
1-8 LTO Gen 1, 2,
3; SDLT 320 and 600 drives or a combination
|
| Cartridge access
port (CAP): |
5-cartridge slot
CAP with removable magazine
|
| Mean exchanges /
swaps between failure (MEBF/MSBF): |
2,000,000
|
| Mean time between
failures (MTBF): |
360,000 hr (full
operation)
|
| Mean time to
repair (MTTR): |
<30 min
|
| Non-disruptive
serviceability: |
Hot-swappable
drives with power supply and fan, plus Ethernet and serial ports for
diagnostics and reporting.
|
| Supported host
platforms: |
UNIX, Linux,
Windows NT, Novell NetWare
|
| Robotics control
interfaces: |
LVD or HVD SCSI
|
| Any Cartridge Any
Slot™ technology: |
Simultaneous
non-partitioned support of multiple tape and media types
|
| Library Admin
software: |
Remote library
monitoring and maintenance (optional)
|
| Library Manager
software: |
Central
management, sharing and robotics control for SCSI-attached libraries
(optional)
|
| Framework Library
Monitor software: |
Host-based and
over SCSI. Monitor and respond to library via leading system management
frameworks (SMFs) (optional)
|
| Library Status
Tool software: |
Embedded software
for remote monitoring and diagnostics of entire system
|
| SNMP: |
Embedded SNMP
agent that enables remote reporting, monitoring and notification via
standard Ethernet connection
|
| Digital vision
system: |
Unique digital
vision camera system performs continuous calibration and reads bar codes
|
| Operator panel: |
User-friendly
configuration and diagnostic controls, status display and viewing window
|
| Automatic clean: |
Dedicated
cleaning cartridge slot for tape drive cleaning by library or software
command
|
| Automatic self
discovery: |
Automatic self
discovery
|
| Continuous
automation calibration: |
No periodic
maintenance or alignment required
|
| Height: |
31.5 in (80.0 cm)
|
| Depth: |
29.0 in (73.7 cm)
|
| Width: |
19.0 in (48.3 cm)
|
| Unit height: |
18u* of standard
19 inch rack space
|
| Weight: |
140.0 lb (63.6
kg)
|
| Temperature
(operating): |
+50° to +104° F
(+10° to +40° C)
|
| Temperature
(non-operating): |
+50° to +104° F
(+10° to +40° C )
|
| Relative humidity
(operating): |
20%-80%
|
| Relative humidity
(non-operating): |
10%-95%
|
| Voltage: |
100-240 VAC @
50-60 Hz single phase (auto-ranging)
|
| Library
(operating maximum continuous - not peak): |
1.40 A @ 120 V,
0.75 A @ 240 V, 180 V or 0.18 KVA, 615 BTU/hr
|
| Optional internal
FC/SCSI router: |
28 VA
|
| Drives: |
Drive power
consumption varies. Refer to individual drive specifications
|
| Safety: |
CSA standard
CAN/CSA-C22.2, no.950-95; UL listed to UL 1950, 3rd Edition; GS licensed to
EN 60950, 2nd Edition, CSA standard CAN/CSA-C22.2, no.950-95; UL listed to
UL 1950, 3rd Edition; GS licensed to EN 60950, 2nd Edition, 1991 + A1, A2,
A3, A4
Nemko, Semko, Demko, Finko certified to EN 60950, (1992) A1/A2/A3/A4/A11,
EMKO-TSE (74-SEC) 207/94; CB test certified
|
| Emissions: |
FCC #47, part 15,
subpart B, class A; VCCI class A European Union CE emissions standards AS/NZS
3548; 1996 (Australia, N.Z.); ICES-003 (Canada)
|
| Immunity: |
European Union CE
immunity standards |
