|
Quantum
Main
 Sunstar
Company. Inc. is proud to be a Quantum partner!
Quantum Scalar 1OK
| |
| |
The Scalar 10K is the SAN-enabled enterprise library
that lets IT departments consolidate storage in a single, easily managed
resource. It is the industry's first capacity-on-demand library,
delivering built-in room to grow and allowing users to increase storage
by activating additional capacity whenever they need it.
 | Capacity-on-demand—Lets IT departments activate
additional storage while paying only for the storage they actually use
|
| Qualified storage network interoperability means
seamless integration into new or existing SANs |
| Single robotics design provides higher performance
and reliability at a lower cost |
| Up to 324 drives |
| Supports LTO and TS1120 technology; provides easy
technology migration and options for mixed-media operation
|
| Fully redundant architecture option—Dual robotics,
controllers, power, and library control paths for continuous operation
|
| Five slots per second inventory speed;
auto-discovery and auto-calibration of all components for rapid
configuration |
| Superior floor space density |
|
|
|
| |
The Scalar 10K operates seamlessly in new or existing storage networks.
It supports multiple protocols and fabrics at the same time, providing
industry-leading scalability, capacity, availability, and technology
independence. A fully redundant library architecture option supports
dual robotics, controllers, power, and library control paths to provide
continual access to data through virtually all service operations.
|
|
|
| |
The Scalar 10K comes with one year on-site service for the highest
levels of protection. |
|
Storage Networking Support
 |
|
|
| |
|
Platform/Connectivity: |
SNC 5100 (2 Gb
Fibre Channel) or SNC 3000 (1 Gb Fibre Channel) |
| Management Services: |
End-to-end path verification, error
recovery, drive performance optimization, SAN security (Scalar
Firewall Manager), serverless backup (Data Mover Module) |
|
|
|
|
|
|
Reliability
|
|
|
|
| |
| Drive Hard Error
Rate: |
Less than 1 in 1017
bits |
| Tape Shelf Life: |
30 years minimum (at 20°C, 40% RH) |
| Library MCBF: |
Greater than
2,000,000 |
| Drive MTBF: |
Greater than 200,000 power-on hours |
| Power: |
2N power for all
systems and drives |
| MTTR: |
30 minutes |
| Library Control
Ports |
Dual, redundant
ports are standard |
| Diagnostics: |
SNMP traps reported through RMU or
Scalar DLC. Built-in self-test, store/restore past events, fault
isolation assistance, self-initiating configuration and calibration;
email alert |
| Module Upgrade: |
Any storage module
may be added in two hours; customer installable drive and slot
upgrade |
|
|
|
|
|
|
Operation
|
|
|
|
| |
| Cartridge Change: |
Up to 450 per hour |
| Drive Interface: |
LTO and Native Fibre: SCSI-2 LVD;
integrated FC interface optional for all; TS1120: SCSI-2, SNC or
Native FC LVD or HVD |
| Library Interface: |
SCSI-2 LVD or HVD;
integrated FC interface optional |
| Inventory Speed: |
100 slots in 20 seconds* |
| Configuration: |
Auto-discovery and
auto-calibration for installed or added components (modules, drives,
magazines, tapes, etc.) |
| Import/Export |
Up to 72 (LTO/TS1120 positions) in
removable magazines |
|
|
|
|
|
|
Environmental
|
|
|
|
| |
| Power: |
208-240VAC; 20 amp
per cabinet |
| Temperature: |
16 to 32°C operating |
| Humidity: |
15 to 75%
non-condensing operating |
|
|
|
|
|
|
Compliance and Certification
|
|
|
|
| |
| Safety: |
EN 60950 with
deviations |
| Emissions: |
CISPR 22/EN 55022 Class A |
| Immunity: |
EN 55024 |
| International: |
CE, FCC, ICES, cTUVus, TUV/GS |
|
|
|
