The IBM Magstar 3590 models B1A and E1A are designed for
automated tape libraries. They are supported in the Magstar
3494 Tape Library, Magstar Virtual Tape Server, and in
selected StorageTek Silos. A Magstar 3494 Tape Library with
the Magstar 3590 E1A drive can have a capacity up to 748TB*
High-performance, high-reliability tape storage with extended media
support and attachment support for SCSI and Ultra SCSI systems
Attaches to IBM AS/400*, RS/6000*, Hewlett-Packard, Sun
Microsystems, and other SCSI systems; Intel**-based systems
running Windows NT**; and Windows 2000; and IBM S/390*
systems.
Offers the choice of an Ultra SCSI interface for a maximum
instantaneous data rate of 42 MB/sec or native Fibre Channel
attachment for a maximum instantaneous data rate of up to 100
MB/sec.
Features an uncompressed drive rate of up to 14 MB/sec to
dramatically reduce backup and recovery times.
Provides rapid access to data (5 meters/sec high-speed
search)
Includes a 10-cartridge Automated Cartridge Facility (ACF)
that functions as a mini-library with random access to up to
1.2 TB of data (compressed) for the Magstar* 3590 Model B11
and E11
Uses Magstar* 3590 E model extended length tape cartridges
that can contain up to 120 GB of data (3:1 compression)
Do you see the tape drive or library that you are looking for?
If so please contact us at 800-663-5523 or click
here. If you can't seem to find your drive or library, please
click here?
Overview
The Magstar 3590 Tape Subsystem consists of a family of
powerful integrated storage solutions that provide the highest
levels of capacity, performance, and data reliability for stand
alone and automated systems. Now, the Magstar 3590 Model E Tape
Drive provides direct attachment to the growing number of open
systems that support native Fibre Channel connection.
Exceptional
performance
The Magstar 3590 Tape Subsystem provides
industry-leading performance with a native drive data rate of up
to 14 MB/sec. Using the LZ1 compression algorithm, sustained data
rates of up to 34 MB/sec are possible with Ultra SCSI attachment.
With the native Fibre Channel connection, Magstar 3590 E Models
are capable of reaching maximum instantaneous data rates of 100
MB/sec and sustained data rates of 42 MB/sec.
High capacity
Using Extended High Performance Cartridge Tape, a Magstar 3590
Model E Tape Drive with extended length support can store up to 40
GB (120 GB with 3:1 compression) on a single cartridge. A Magstar
3590 Model B can store up to 20 GB of data (60 GB with 3:1
compression) on a cartridge. The result is less tape cartridge
handling, improved automation slot utilization, and a reduction in
floor space requirements.
Magstar 3590 metal particle tape media is housed in a cartridge
with the same physical size as 3490 cartridges, enabling
coexistence in an IBM Magstar 3494 Tape Library. The Magstar 3494
Tape Library with Magstar 3590 drives provides access to as much
as 748 TB (with 3:1 compression).
Improved reliability
and integrity
The Magstar 3590 Tape Drive is designed for
mission-critical data storage. Improved Error Correction Code (ECC)
and servo tracks written on each tape cartridge help ensure high
data integrity. Resident diagnostics dynamically monitor drive and
media performance to detect potential problems and aid in
resolution.
In addition, the Magstar 3590 provides redundant data protection
capabilities. Because data is systematically disbursed across the
media as it is written and redundant parity checking bits are
included, there is less chance of an information loss when a
topical media error occurs.
Leading-edge
technology
The Magstar 3590 Model E uses a bi-directional
longitudinal serpentine recording technique and a
fourth-generation magneto-resistive head that concurrently reads
and writes 16 data tracks. This means that 256 tracks of data can
be reliably written onto Magstar 3590 media. In addition, the
electronics have been enhanced with a new digital channel
technology that further increases data integrity.
Do you see the tape drive or library that you are looking for?
If so please contact us at 800-663-5523 or click
here. If you can't seem to find your drive or library, please
click here?
Investment
protection
Existing Magstar Model B11 and B1A Tape Drives (B
Models) can be field-upgraded to the new E Models, which helps
protect existing investments in Magstar 3590 technology. Media
investments are also protected, because the new E Model drives can
both read (128 track) and write (256 track) to existing
cartridges. In addition, IBM continues to market Magstar 3590 B
Models as well as the newer E Models.
Support for the new Magstar 3590 Extended High Performance
Cartridge Tape, which doubles storage capacity, is available on
both the 3590 B and E models. All new Magstar 3590 Tape Drives
feature this support, while existing drives can be field-upgraded.
The E Models can be upgraded to provide Fibre Channel support.
Cost effectiveness
High-capacity media along with high-performance
drives mean that less equipment and fewer cartridges and tape
mounts are required. This translates into less floor space needed
for tape drives, tape libraries, and tape cartridge storage.
The resulting savings from reduced tape hardware and media
requirements can help justify an investment in data automation.
Over time, the lower cost of a Magstar 3590 Tape Drive
implementation enables more data to be automated.
A reusable storage asset, the Magstar 3590 protects existing
investments and can be used as the foundation for a broad array of
storage solutions. The Magstar 3590 also provides the capability
to share tape drives through two Ultra SCSI or Fibre Channel
ports.
Ease of use
The Magstar 3590 Models B11 and E11 incorporate a
standard 10-slot ACF for high-capacity, stand alone unattended
operation. The ACF can be used in random access mode as a
mini-library. Cartridges are loaded into and unloaded from the ACF
in a convenient, portable 10-cartridge magazine.
The Magstar 3590 also features an operator/service display showing
device status, activities, error conditions, and messages.
The Magstar 3590 Models E11 and E1A now provide native Fibre
Channel attachment for drives used in standalone configurations,
with the Magstar 3494 Tape Library, or with a StorageTek Automated
Cartridge System (ACS).
Fibre Channel servers can be supported at distances of up to 500
meters from the Magstar 3590 Tape Drive,or up to 10km with the IBM
2109 Switch or 2103 Hub
Do you see the tape drive or library that you are looking for?
If so please contact us at 800-663-5523 or click
here. If you can't seem to find your drive or library, please
click here?
Service
Magstar 3590 does not require scheduled preventive
maintenance. IBM customer engineers use a built-in subsystem panel
to perform service functions.
Magstar 3590 models
The Magstar 3590 is available in several configurations for
Ultra SCSI and Fibre Channel attachment:
The Magstar 3590 Models B11 and E11 are rack-mounted and
incorporate a 10-cartridge ACF for high-capacity unattended
operation. The Models B11 and E11 can be converted to Models
B1A or E1A.
The Magstar 3590 Models B1A and E1A have no ACF and are
designed to be incorporated into the Magstar 3494 tape
library.
The Magstar Model C12 frame with one to four Model B1A or
E1A Tape Drives provides attachment to the StorageTek 4410 and
9310 ACS.
Temperature with media in use 60 F to 90 F
(16 C to 32 C)
Standard
Standard
Standard
Standard
Standard
Relative humidity (20% to 80%)
Standard
Standard
Standard
Standard
Standard
Wet bulb maximum (73.4 F; 23 C)
Standard
Standard
79F; 26C
78F; 25C
78F;25C
Heat output (BTU/hr)
1024
1024
7830
770
770
Power requirements (kVA)
0.300
0.300
1.2000
0.225
0.225
¹ B Models use eight sets of 16
tracks; E Models use 16 sets of tracks
² Depending on data content, with 3:1 LZ1 data
compression
³ Depending on library model, since B1A and E1A Models
reside in an IBM Magstar 3494 (or in a C12 or C14 frame
for the StorageTek 4410 or 9310 ACS)
Do you see the tape drive that you are looking for?
If so please contact us at 800-663-5523 or click
here.
If you can't seem to find your drive, please
click here?
The IBM Magstar™ 3590 Tape Subsystem provides the highest levels
of capacity, performance, and reliability of any IBM tape
subsystem and exemplifies IBM's continued leadership in storage
products. Since its first shipment in September 1995, it has met
with wide market acceptance. Over 80,000 Magstar 3590 Tape Drives
are installed in both IBM and non-IBM systems across industry
sectors.
Benefits
•
Enhance tape sharing with cross enterprise
attachment
•
Improve backup window management
•
Centralize storage management and provide
near-online storage
•
Improve data availability
•
Reduce infrastructure costs while improving
performance
Highlights
•
Native data rate up to 9MB with Model B;
Model E native data rate up to 14 MB or up to 150GB per
hour compressed
•
Up to 40 GB native cartridge capacity (Model
E Extended High Performance Cartridge Tape)
•
Choice of Dual Ultra SCSI or Dual Fibre
Channel ports (Model E) for enhanced sharing and
availability options
•
Near online storage of up to 748TB of
compressed data storage with 3590 Model E1A tape drives in
an IBM 3494 Tape Library
•
Model E Fibre Channel attachment for IBM
iSeries, pSeries, xSeries (NUMA), Sun, Windows NT2000;
3590 Model A60 FICON and ESCON attachment for selected
S390 and zSeries 900 servers
Do you see the tape drive that you are looking for?
If so please contact us at 800-663-5523 or click
here.
If you can't seem to find your drive, please
click here?
The IBM Magstar™ 3590 Tape Subsystem provides the highest levels
of capacity, performance, and reliability of any IBM tape
subsystem and exemplifies IBM's continued leadership in storage
products. Since its first shipment in September 1995, it has met
with wide market acceptance. Over 80,000 Magstar 3590 Tape Drives
are installed in both IBM and non-IBM systems across industry
sectors.