The Exabyte X80 MammothTape™ tape library with native fibre
channel is typically installed in large application servers and networks. It
supports lights out data center operations, unattended network backup and
restore, remote storage, automated archiving, imaging and hierarchical storage
management.
The X80 accommodates from two to eight Mammoth-2 (M2™) tape drives with fibre
channel connectivity and from 40 to 80 data cartridges. All Exabyte libraries
feature the industry's most advanced and durable robotics system as well as a
user-friendly interface and modular design.
Fibre channel connectivity provides native SAN and serverless backup, offering
enhanced performance and reliability features. M2 drives inside the library
communicate directly with RAID devices, bypassing the server and eliminating
large backup windows. Users get continuous 24/7 backup and restore operations at
speeds up to five times faster than competitive libraries. View the
Fibre
Channel Compatibility pages for information about how this product works
with routers, hubs and other hardware.
Exabyte libraries are seventh-generation products that consistently demonstrate
the highest levels of reliability and software compatibility. Their use can cut
data management cost and time by 50 percent. Recognized as the world leader in
data storage automation, Exabyte has shipped more tape libraries than any other
company. The installed base of Exabyte tape drives and libraries today exceeds
1.5 million units.
Part Number
Part Name
Description
270014-1322
Exabyte X80 Mammoth-2 Tape Lib Fibre
80slot/12TB
Fibre Channel/Multi-mode 850 nm Finistar
GBIC
270014-1323
Exabyte X80 Mammoth-2 Tape Lib Fibre
80slot/12TB
Fibre Channel/Multi-mode 850 nm Finistar
GBIC
270014-1321
Exabyte X80 Mammoth-2 Tape Lib Fibre
40slot/6TB
Fibre Channel/Multi-mode 850 nm Finistar
GBIC
270014-1320
Exabyte X80 Mammoth-2 Tape Lib Fibre
40slot/6TB
Fibre Channel/Multi-mode 850 nm Finistar
GBIC
Data Sheet
Capacity:
4915.2 GB, native/uncompressed
Transfer Rate:
345.6 GB per hour, native/uncompressed
Drive(s):
Mammoth-2 FC
Cartridge Number:
80
Access Time:
10 seconds, maximum
Interface:
Fibre Channel
Reliability:
Robotics:
>1,000,000 mean cycles between failures
Drive MTBF:
250,000 hours
Environmental:
Operating temperature:
5° C to 35° C (41° F to 95° F)
Nonoperating temperature:
-20° C to 60° C (-4° F to 140° F)
Relative humidity, noncondensing, operating:
20% to 80%
Power:
100 to 240 VAC, 50 to 60 Hz
Auto-switching power supply
300 watts maximum (approx.)
90 watts minimum (approx.)
Dimensions:
Standalone:
38.6 in. x 19.0 in. x 29.0 in.
98.1 cm x 48.3 cm x 73.7 cm
Rack-mount:
34.6 in. x 19.0 in. x 29.0 in.
96.5 cm x 48.3 cm x 73.7 cm
Shipping package:
65.6 in. x 33.5 in. x 36.0 in.
166.7 cm x 85.1 cm x 91.4 cm
Weight:
Standalone: 264.3 lbs.
Shipping weight: 319 lbs.
Rack-mount: 199.8 lbs.
Shipping weight: 233 lbs.
Additional drive in carrier: 9.5 lbs.
Additional power supply: 7 lbs.
Weights cited include 2 tape drives, 8 data cartridge magazines and no data
cartridges, with one power supply
Certifications:
UL, CSA, IEC, FCC, TUV, CISPR
Warranty:
Three-year
First year on-site service in North America and Europe (subject to
geographical limitations)
Exabyte Fibre Channel libraries like the 430M,
X80 and X200 are compatible with the following hardware in the same SAN. This
list changes often as new hardware products are tested and certified by Exabyte
engineers. All hardware was tested using the XIOtech® MAGNITUDE™ Fibre Channel
RAID hardware platform.
Host Bus Adapters: abbreviated
HBA, they are the connection between storage devices and servers,
translating the Fibre Channel protocol to the server through a PCI slot.
Manufacturer
or Model
BIOS
Version
Driver
Version
Compatibility*
Comments
Adaptec
9110G
T
Cambex
1.37
v 7.05.05
T
Emulex
LP850
3.22a1 or 3.82a1
v 5-4.52a7
LP7000E
3.22a1
v 5-4.52a7
LP8000-F1
3.03XA
v 5-4.52a7
T
LP9000/2
3.82a1
v 5-4.52a7
These adapters cannot be
used in the same topology with HBAs from Qlogic and possibly from other
vendors as well
LSI Logic
449290
T
JNI
FCE 3210
v 1.16x
Qlogic
2100
1.37
v 7.05.05
T
2200F
1.61
v 8.00.08
T
2300
1.04
v 8.00.08
These adapters cannot be
used in the same topology with HBAs from Emulex and possibly from other
vendors as well
SAN Connectivity Kit 1000
C
LSI
21040-33
4.19.00
v 5.09.00
T
* Hardware Compatibility Key
T - Tested (or tests audited)
by Exabyte.
C - Compatible, should work
but not specifically tested by Exabyte.
S - Subset of the possible
drive configurations tested.
O - OEM driver tested (or
tests audited by Exabyte).
X - The device is not a
library.
ML - The device is a multi-LUN
based library.
ID - The device is a SCSI ID
based library.
Certified - Fully tested and
qualified by Exabyte.
Supported - Indicates latest
vendor-released firmware. If the Compatibility column does not indicate
"Certified" this revision was not tested by Exabyte but is believed to be
fully compatible.
Routers: connected to at least
two networks, they decide which direction packets of network data should
travel.
Model
Firmware Version
Compatibility*
Comments
ATTO
1100
T
4500
Crossroads
4150-T
2006X or higher
T
4200-T
2006X or higher
T
Chaparral
FS1110
R412ROZE
* Hardware Compatibility Key
T - Tested (or tests audited)
by Exabyte.
C - Compatible, should work
but not specifically tested by Exabyte.
S - Subset of the possible
drive configurations tested.
O - OEM driver tested (or
tests audited by Exabyte).
X - The device is not a
library.
ML - The device is a multi-LUN
based library.
ID - The device is a SCSI ID
based library.
Certified - Fully tested and
qualified by Exabyte.
Supported - Indicates latest
vendor-released firmware. If the Compatibility column does not indicate
"Certified" this revision was not tested by Exabyte but is believed to be
fully compatible.
Hubs: they can include routers
and switches and are places where data converges and is sent to other places
in the network.
Model
Ports
Firmware Version
Compatibility*
Comments
Gadzoox
Gibraltar
12
Completed
Vixel
1000
7
T
2000
12
T
Managed
2100
8
v 1.2 or higher
Zone Managed
* Hardware Compatibility Key
T - Tested (or tests audited)
by Exabyte.
C - Compatible, should work
but not specifically tested by Exabyte.
S - Subset of the possible
drive configurations tested.
O - OEM driver tested (or
tests audited by Exabyte).
X - The device is not a
library.
ML - The device is a multi-LUN
based library.
ID - The device is a SCSI ID
based library.
Certified - Fully tested and
qualified by Exabyte.
Supported - Indicates latest
vendor-released firmware. If the Compatibility column does not indicate
"Certified" this revision was not tested by Exabyte but is believed to be
fully compatible.
Switches: simpler and faster
than a router, they select a path or circuit for sending a unit of data to its
next destination.
Manufacturer or Model
Ports
Firmware Version
Compatibility*
Brocade
Silkworm 2050
8
v2.2.1 or higher
T
Silkworm 2400
8
v2.2.1 or higher
T
Silkworm 2800
16
v2.2.1 or higher
T
Silkworm 3800
16
v2.2.1 or higher
T
Vixel
7100
8
v3.3 or higher
T
7200
16
v3.3 or higher
T
9100
16
T
2040
12
T
Gadzoox
Slingshot 4216
16
C
Slingshot 4218
16
C
3000
16
T
QLogic
San Box 2
16
1.2.09 or higher
T
SAN Connectivity Kit 1000
8
C
* Hardware Compatibility Key
T - Tested (or tests audited)
by Exabyte.
C - Compatible, should work
but not specifically tested by Exabyte.
S - Subset of the possible
drive configurations tested.
O - OEM driver tested (or
tests audited by Exabyte).
X - The device is not a
library.
ML - The device is a multi-LUN
based library.
ID - The device is a SCSI ID
based library.
Certified - Fully tested and
qualified by Exabyte.
Supported - Indicates latest
vendor-released firmware. If the Compatibility column does not indicate
"Certified" this revision was not tested by Exabyte but is believed to be
fully compatible.
GBICs: short for gigabit
interface converter, they convert electric currents to optical signals
(and vice versa) at rates of one gigabit per second or more.
Type
Model
Version
Compatibility*
Comments
Finisar
Optical
FTR-8519P-5A
5.1
T
Copper
FCM-8519-2-T4
5.1
T
Use only with standalone M2
enclosure
IBM
Optical
21H9834
T
AMP
Optical
887127-1
T
* Hardware Compatibility Key
T - Tested (or tests audited)
by Exabyte.
C - Compatible, should work
but not specifically tested by Exabyte.
S - Subset of the possible
drive configurations tested.
O - OEM driver tested (or
tests audited by Exabyte).
X - The device is not a
library.
ML - The device is a multi-LUN
based library.
ID - The device is a SCSI ID
based library.
Certified - Fully tested and
qualified by Exabyte.
Supported - Indicates latest
vendor-released firmware. If the Compatibility column does not indicate
"Certified" this revision was not tested by Exabyte but is believed to be
fully compatible.
Sunstar is proud to be an Exabyte Partner!
