|
IBM System Storage (SAN and NAS)
Entry Level Storage Systems
|
|
Host Connection |
Overview |
|
DS3400 |
Fibre |
Support for up to 8 hot-swap
Serial Attached SCSI (SAS) or Serial ATA (SATA) hard disk drives (HDDs)
(with optional 4-pack upgrade).
Scalable to 96TB of storage with the EXP3000 expansion unit. |
|
DS3500 |
Fibre, iSCSI, SAS, 10GB iSCSI |
Support for intermixing SAS and Fibre Channel
or SAS and iSCSI interfaces allows for cost-effective SAN tiering and
consolidation |
|
EXP3500 |
|
Next-generation SAS expansion enclosures
Supports high bandwidth and random I/O applications with 6 Gbps x4-wide SAS
ports
Support for up to 24 TB of SAS physical disk storage in a single enclosure
and up to 384 TB when fully expanded up to 192 drives |
|
EXP3000 |
3 Gbps Serial Attached SCSI (SAS) |
A
high-density 2U, 19"
rack-mountable driven closure designed for supporting a total of 12 Serial
Attached SCSI (SAS) 3.5-inch disk drives
The dual-port MegaRAID 8480 adapter is optimized for cost-sensitive and
space-limited environments that demand both feature-rich and
high-performance solutions. The adapter delivers an intelligent and robust
RAID solution supporting RAID levels 0, 1, 10, 5, and 50, and utilizing a
high-performance Intel I/O processor for optimum RAID performance and a
PCI-Express host interface for increased bandwidth. |
Mid-range Disk Systems
|
|
Host Connection |
Overview |
|
Storwize
V7000 |
Fibre |
Twenty four 2.5" drive bays (Model 124)
or twelve 3.5" drive bays (Model 112), up to 24 TB of physical
storage using 2 TB near-line SAS disk drive modules on the 2076-112 model,
or up to 14 TB physical storage using 600 GB SAS disk drive modules. Eight 8
Gbps FC host ports (four 8 Gbps Fibre Channel ports per RAID controller) and
four 1 Gbps iSCSI host ports (two 1 Gbps iSCSI host ports per RAID
controller), with an RJ-45 connector for each port. RAID controller supports
attachment of up to nine storage expansion units with configurations up to
240 TB physical storage capacities |
|
DS5000 Series
DS5100 & DS5300 |
Fibre or iSCSI |
Up
to 700,000 IOPs and 6400 MBps - balanced performance well-suited for
virtualization/consolidation.
268.8 TB (using all Fibre Channel or
FC-SAS disk drives), 960 TB using all SATA disk drives |
|
EXP5060 Expansion |
|
Supports up to 60 SATA drives in just 4U of rack space
Online
serviceability of individual drives
Individual extension of 12-drive drawers, Reside in a standard 19" rack
Supported by DS5300 and DS5100 disk systems
Support
for intermixing EXP5060 and EXP5000 expansion units |
|
DS5020 |
Fibre or iSCSI |
Next-generation 8 Gbps FC interfaces enable
infrastructure simplification, mixed host interfaces support (FC/iSCSI)
enables SAN tiering. Support for intermixing FC/FDE/SATA/SSD drives. |
Enterprise Disk Storage
| |
Host Connection |
Overview |
|
DS8000 |
Fibre |
Availability
and resiliency: Greater than five-nines availability built on the
lineage of the IBM POWER® server architecture.
IBM System Storage® Easy Tier feature automatically helps
optimize solid-state storage deployments in multitier systems.
lity: Support for an extensive
variety of server platforms, drive tiers, and application workloads, can
help enable cost-effective storage consolidation. Models can scale up from
the smallest configuration to the largest configuration – over two petabytes
– nondisruptively |
|
XIV
Gen3 Storage System |
Fibre |
High-end, disk storage system with a
virtualized grid architecture designed to eliminate the complexity of
storage administration. High reliability and data availability via
active-active N+1 redundancy of all key components, partition mirroring,
unique self-healing, rapid rebuild times, and non-disruptive upgrades. Enterprise-level,
consistent performance through massive parallelism, disk
utilization and unique caching mechanisms. Rich
function set standard with the system
software includes snapshots, thin provisioning, data migration,
asynchronous and synchronous mirroring and an intuitive management console |
Network Attached Storage
|
|
Host Connection |
Overview |
|
IBM System Storage N3000
|
Simultaneous
multiprotocol support for FCP, iSCSI, CIFS, NFS, HTTP, and FTP |
Up to 136 TB raw storage capacity
Up to 4 GB ECC memory
Up to eight full-duplex 10/100/1000 Base-T Ethernet
ports |
|
IBM System Storage N6000 |
Up to 840 TB raw storage capacity
 4 GB to 32 GB
cache memory
512 MB to 4 GB nonvolatile memory |
|
IBM System Storage N7000 |
Up to 1.176 PB raw storage capacity
16 GB to 64 GB ECC memory
512 MB to 4 GB nonvolatile memory |
Do you see the solution you are looking for?
If so please contact us at 800-663-5523 or click
here.
If you can't seem to find it, please
click here?
|
