|
SAN
DAS
NAS
iSCSI Dell Equallogic
Dell EqualLogic PS6000E Series
The PS6000E is an
enterprise-class iSCSI SAN ideal for organizations looking to consolidate
storage cost-effectively without sacrificing capabilities. The EqualLogic peer
storage architecture delivers a capable and affordable SAN that is extremely
simple to manage and has an all-inclusive software suite which helps reduce
Total Cost of Ownership (TCO).
Whether you are looking for a storage solution that solves tactical problems and
can easily scale to meet your strategic goals, or you know you require more than
one hundred terabytes from the start, the PS6000E’s modular scalability can
assure you a SAN to fit your needs.
The PS6000E line spans from 2 to 16TB in capacity in a single array, utilizing
SATA drives ranging from 250GB to 1TB. It is built from fully redundant,
hot-swappable enterprise hardware. For applications that don’t demand
mission-critical redundancy, there are dual controller configurations of the
PS6000E that make it even more cost-effective. Built-in software functionality
includes SAN HQ Multi-SAN historical performance monitoring, automatic load
balancing, Microsoft and VMware application integration, snapshots and
replication, multi-path I/O, consistency sets, thin provisioning and much more.
Seamlessly integrated with all other PS Series
storage arrays, the PS6000E expands your ability to optimize performance and
capacity using storage pools and tiers matched to application demands. And with
online data movement between tiers, you gain flexibility to adjust without
disruption as your business evolves.
Product Configurations
- Storage Controllers
Base Model
Single controller with 2GB battery-backed cache memory, only
available with 250GB1
disk drive options
High-Availability Model
Dual controllers with a total of 4GB battery-backed cache memory
Battery-backed cache provides up to 72 hours of data protection
- Hard Disk Drives
Eight (8) or Sixteen (16) SATA hot-pluggable hard disk drives
- Drive Capacities
7,200 RPM SATA II drives available in 250GB, 500GB or 1TB1
- System Capacities
- Base Model
2TB1
using eight (8) 250GB1
SATA disk drives
4TB1
using sixteen (16) 250GB1
SATA disk drives
- High-Availability Model
4TB1
using sixteen (8) 250GB1
SATA disk drives
8TB using sixteen (16) 500GB1
SATA disk drives
16TB using sixteen (16) 1TB1
SATA disk drives
Technical Highlights
- Volumes
Up to 1,024
- Snapshots
512 per volume / up to 10,000 total
- Hosts Accessing PS
Series Group
Up to 512 per pool / 2,048 per group
- Host Protocol
Any standards compliant iSCSI initiator
- Operating Systems
Supported
- Windows® 2000
Server
- Windows Server®
2003
- Windows Server®
2008, including Hyper-V™
- VMware® ESX Server
3 / 3.5 / ESXi 3.5
- Citrix® XenServer™
- Red Hat® Enterprise
Linux®
- SUSE® Linux
Enterprise
- Linux
- SunTM Solaris™
- UNIX®
- IBM® AIX
- HP-UX®
- Mac OS® X
- Novell® Netware®
- RAID Support
Automatic RAID 5, RAID 6, RAID 10, and RAID 50
- GbE Network Interfaces
Four (4) copper
- TCP Network Support
IPv4, IPv6 core support including JITC
- Expansion Option
Can be combined with other EqualLogic PS Series arrays in the
same SAN group online
Reliability
- Redundant, hot-swappable
controllers, power supplies / cooling fans, and disks
- Individual disk drive slot power
control
Enclosure Monitoring System
- Automatic spare configuration
and utilization
- SMART
- Automatic bad block replacement
- Auto-Stat Disk Monitoring System
(ADMS) to monitor health of data on disk drives
Management Interfaces
- SAN HeadQuarters multi-group
performance and event monitoring tool
- SNMP, telnet, SSH, HTTP, Web (SSL),
host scripting
- Serial console
- Multi-administrator support
- Ability to configure a separate
management network
Security
- CHAP authentication
- Access control for iSCSI
- Access control for management
interfaces including RADIUS support
Notification Methods
- SNMP traps, e-mail, syslog
Power
- AC voltage: 100-240 VAC ±10%
single phase
- Frequency: 47-63 Hz
- Power factor: 0.98 (minimum)
- Power consumption: 450 VA, 530
PeakVA (operating maximum)
- Heat dissipation: 1,550 BTU per
hour (maximum)
- Power supplies: Dual 440W DC
Environmental
- Temperature range: 5 to 35 °C /
41 to 95 °F
- Storage temperature: -20 to 60
°C / -22 to 140°F
- Altitude: -70 to 3,048 m
operational / -305 to 12,192 m non-operational
- Relative humidity: 20 to 80%
non-condensing operational / 5 to 95% non-condensing
non-operational
- Shock: 5 g 10 ms ˝ sine
operational / 30 g 10 ms ˝ sine non-operational
- Vibration: Random .21 grms @
5-500Hz operational / Random 1.04 grms 2-200Hz non-operational
- Acoustics: Sound Power
Operating: > 5.8 db LpA @ 20°C
- Air Quality: Airborne
contaminant level of G2 or lower as defined by ISA-S71.04-1985
Physical
- Height: 13 cm / 5.12 in / 3 EIA
units
- Width: 48.26 cm / 19.0 in / 1EC
Rack Compliant
- Depth: 55.1 cm / 21.7 in
- Weight: 35 kg / 77.6 lb (maximum
configuration)
Dell ProSupport
Is a configurable suite of support
services that enables you to build a support solution based on who
you are, how you use technology, and where you want to allocate
your IT resources. We know downtime equals lost productivity and
revenue and that storage is the heart of the data center. That’s
why Dell ProSupport goes beyond the hardware protection included
in the Dell EqualLogic basic hardware service. Do you need full
service support or do you have an IT staff—choose between
ProSupport for End-User and ProSupport for IT.
Dell ProSupport for End-Users or Dell ProSupport for IT
With NBD or 4hr Onsite Response Options Provides:
- How-to Application &
Configuration Assistance
- 24x7 phone and online support
- Collaborative hardware and
software support
- Single point of contact for
escalation management with customer-defined severity levels
- Global Command Centers to help
manage critical situations, monitor all onsite dispatches, and
provide proactive crisis management during events like natural
disasters
Request a Quote
or Information
|
