Arena Products    Direct Attached Storage

 Sunstar is proud to be a Arena partner!

Arena's newest solution to it's Sivy series RAID comes the Arena SA-7230 Serial ATA RAID. Adopting the new Serial ATA interface that will revolutionize the next generation RAID system, a new compact 2U 12 bay chassis, the Arena SA-7230 features a Intel i80321 64-bit RISC microprocessor which allows data transfer rates of up to 320MB/s. This new technology brings greater confidence to the users of cost effective ATA RAID solutions that offer better transfer performance as well as data reliability.

As all Arena RAID solutions, the Sivy SA-7230/SA-7231 is designed to simplify complicated and time consuming operations. Compared to the conventional disk array, which is designed for experienced IT professionals, Arena comes with the innovative Plug-N-Play RAID. Just attach to your host server and Arena is up and running after following the step-by-step built-in setup program and a user interfaced button on the front panel.

The high availability hardware and firmware architecture automatically detects bad sectors and failed disk drives. When installing a replacement disk or using a hot spare disk, the system automatically rebuilds data without keyed in commands or functions.

An LCD panel Display a comprehensive operating status. Upon failure (HDD) the built in buzzer sounds and LCD panel indicated the failure status simultaneously. With the system on, remove and install hot swap components without interrupting data access.

In-Built Controller:

Intel i80321 RM RISC Microprocessor up to 320 MB/s (SA-7230) or 2Gb/s per loop (SA-7231) transfer rates. ECC equipped.

Cache Memory:

512MB~1GB DDR SODIMM

RAID Levels:

0, 1, 0+1, 3, 5, 30, 50, JBOD, and NRAID in up to eight multiple independent arrays.

Global Hot Spare, and auto-rebuild

Interface

Host Bus:

Dual Ultra320 LVD SCSI (SA-7230) / Dual 2Gb Fibre Channel (SA-7231)

Disk Bus:

Serial ATA

ID Assignments

SCSI (SA-7230): 0~15

Fibre Channel (SA-7231): 0~125

Drives:

Hot swapable
Up to twelve 3.5 inch S-ATA drives (1” height)
Support Big Drive HDD (250GB+)

Maximum Fault Tolerance Capacity:

> 3.5TB

Host Requirement:

Host Independent and Transparent

Power Supply Capacity:

460W x 2 Redundant

AC Input Voltage:

110~240V (+/-10%), 47~63 Hz

Dimensions:

88 (H) x 485 (W) x 555 (D) mm

Relative Humidity:

10% to 85% Non-condensing

Operating Temperature:

5 C~40 C

Weight:

16 kgs (without Disk Drives)

 

Data sheet

The Arena Sivy comes with an embedded RJ-45 port to use with our easy-to-use, web based GUI RAID management software (Global-Net).

This software allows users to setup RAID configuration, status monitoring and detection of hardware failure via RJ-45 ethernet connection. Global-Net alerts failure through e-mail and monitors RAID status from the world wide web by using any standard web browser.

RAID Management

Configure and Re-configures RAID. Assigns spare drive. Host ID settings.

Status Monitoring

Auto detects multiple RAID devices connected to LAN. Displays the array configuration, drive model and capacity. Monitors physical drives, temperature, fan and power supply status. Displays drive status (on-line, spare) and indicates failed drive location.

Event Display and Notification

Real-time display and record of all events. Alarm notification though e-mail.

Remote Monitoring

Web-based remote monitoring allows administrators to oversee RAID status globally in mission critical environments.

Do you see the solution you are looking for?  If so please contact us at 800-663-5523 or click here.

If you can't seem to find it, please click here?

_____________________________________________________________________________________________________

Home    How to reach us!    Request a Quote or Information    Site Map   News    Forms    Policies   Search

Please contact us at 800-663-5523 or click here  for Pricing, Inventory or to Request additional information on any product .